卡車床重新粉刷：如何改變一張舊的卡車床

卡車床重新粉刷：如何改變一張舊的卡車床

December 30, 2020

Drivers increasingly expect our cars and trucks to last a long time. The average age of a vehicle today is about 11 years, with many older classic and vintage vehicles still making their way reliably down the road. At some point, though, an aging vehicle may require restorations, including a repainting job.

If you plan to restore an old truck bed and you want to remove the old paint and layers of grime, you may find hand-sanding takes a lot of time and effort. With manual sanding, it’s also tricky to get paint out of corners and crevices — you may not be able to get full access to them, no matter how hard you try.

Abrasive blasting is an ideal solution. It removes paint and encrusted dirt from your truck bed, so you can get on with the painting work to get your truck looking as good as new. The guide below will explain the process in more detail and discuss how to paint a truck after abrasive blasting.

Preparing Your Truck Bed for Repainting

準備卡車床進行重新粉刷，您需要首先修補金屬，可能具有磨料爆破。欧宝体育下载苹果
What is abrasive blasting? This process resurfaces metal by using compressed air to scour it with rough material, often tiny grains like sand, steel shot or plastic. Abrasive blasting may use many different materials, depending on the metal and finish you’d like.

如何使用磨料爆破來準備卡車床以便欧宝体育下载苹果重新粉刷？在整理OB体育A欧宝体育下载苹果;PP线路係統中，我們可以使用磨料爆破來讓您的金屬卡車準備好灑水，無論其床的尺寸或形狀。

繪畫需要相對光滑，幹淨的表麵，但較舊的金屬卡車床往往是粗糙和髒的。一張舊的卡車床可能有一個老化，剝皮層，而且多年可能已經粘貼了一些厚厚的灰塵和汙垢。在應用新鮮幹淨的塗料之前，你需要脫掉舊層。

That’s where abrasive blasting comes in. The tough abrasives we use in our processes can have those rough, unsightly layers off your old truck bed in no time. Our materials include the following.

• 噴砂media
• Glass beads
• Steel shot and grit
• Aluminum oxide
• Silicon carbide
• BLACK BEAUTY®
• Plastics
• 椋鳥™
• 玉米棒子
• 核桃貝殼

完成係統如何為磨料爆破準備OB体育APP线路卡車床？欧宝体育下载苹果以下是我們采取的一些步驟。

• Analysis:First, we examine the truck bed to ensure it’s an ideal candidate for abrasive blasting. A bed with minimal corrosion that primarily needs stubborn dirt and paint layers scraped off will likely see excellent results. If the bed has extensive corrosion, we can still apply abrasive blasting to it, but it will probably need to have new parts welded in to replace the damaged areas.
• Metal assessment:然後，我們評估金屬的狀況，以確定最佳類型的磨蝕性。如果材料過於苛刻的金屬，它可以翹曲床或在其中爆發孔。或者，如果它不夠磨損，那就會做一個糟糕的工作，或者導致過程需要比它更長的時間。您使用的專業人士可以幫助選擇您特定卡車金屬和配置的最佳媒體。
• Blast cabinet preparation:最後，我們準備好從卡車麵板擦拭不需要的材料的磨料爆炸櫃。

如何塗上卡車床

卡車床如何重新粉刷過程工作？我們將瀏覽以下步驟。

1. Disassemble Truck Bed Panels

第一步是把你的卡車床分開,如果possible. Detachable panels will fit into the blasting cabinet, but an intact truck bed will not. If you can’t disassemble your panels, you’ll need to use a handheld blaster instead of a cabinet.

2.剝離油漆和汙垢

下一步是使用磨料爆破從卡車床上去除舊油漆，汙垢和欧宝体育下载苹果碎屑。使用加壓空氣，噴嘴和保護性爆破櫃，操作員將在高速下在床上分布在床上以獲得最佳磨蝕效果。

It’s critical to move thoroughly and swiftly over the truck bed at this stage. Blasting an area with abrasives for too long can cause that spot to warp, crack or develop holes. It’s also essential to apply the abrasives thoroughly to ensure a clean, even finish. Fortunately, our technicians have extensive experience and practiced eyes, so they can remove the necessary paint and debris and leave a sturdy, clean metal surface that’s ready for painting.

3.清潔床

After abrasive blasting, the truck bed may contain tiny pieces of abrasive. You’ll want to sweep or vacuum to clear out any larger debris. A quick wash can then remove any leftover pieces to ensure they don’t interfere with the paint application.

4. Apply Primer

In some cases, you may need to apply a primer or adhesion promoter, so your paint will stick properly to the metal. Check the paint you plan to use to see what the manufacturer recommends.

5. Paint

磨料爆破並確欧宝体育下载苹果保床清潔且沒有碎片，是卡車床畫的時候了。請務必使用遮蔽膠帶來涵蓋您不想應用塗料的任何零件。如果您沒有為爆破過程執行此操作，您可能希望拆下後擋板以便於訪問。您還想在戶外或通風良好的安全區域工作。

If you’re wondering how to paint the inside of a truck bed, the process is relatively straightforward. Start painting by using a brush to apply paint to the bed rails, corners and any other areas that present a challenge to reach. Then, apply a single coat of paint to the bed’s sides and flat surfaces. You can use a brush roller for this step, being sure to cover the metal thoroughly. Wait about 20 minutes, then apply a second coat to ensure full, uniform coverage. You can continue adding coats to enhance the paint’s thickness or appearance if you wish.

完成繪畫後，脫掉膠帶，重新安裝後擋板，並將新鮮的卡車床送到一天幹燥。

6.應用塗料保護器

If you would like, apply a paint protector to the truck bed. A paint protector helps the paint job last longer by guarding against minor nicks, scratches and sun damage.

Work With Finishing Systems for Quality Truck Bed Restoration

在重新粉刷之前快速地從卡車上清除油漆，汙垢和碎屑，接觸精加工係統。OB体育APP线路我們的服務為重新粉刷的卡車床使用高級爆破媒體，因此您可以開始將您的卡車床恢複到醒目的顏色和閃光。我們提供了廣泛的磨料目錄，可以幫助您選擇快速安全地恢複卡車金屬的完美媒介。

卡車床畫和重新架鋪設的成本各不相同。與我們經驗豐富的專業人士交談，以了解有關您獨特的卡車床所需的內容。

Contact us today to schedule refinishing services or get more information.